Completed Jobs by Dallas Security Systems

April 14, 2025 | Irving, TX

DSS was contacted to replace the PTZ camera on the roof with a 16MP 180 Panoramic camera. We successfully replaced the PTZ camera on the roof viewing the visitors parking with a 180 camera. Next, we had to install a 6 x 6 x 4 weatherproof box. Replaced 4 feet of half inch seal tight and ...

March 28, 2025 | Frisco, TX

Customer contacted DSS to upgrade the 17 existing prox readers to the Brivo Mobile capable readers. We installed all 17 Brivo readers and ensured readers were working with the customer at the end of the job.

March 26, 2025 | Dallas, TX

Customers requested DSS to install an Aiphone Video intercom system for the entrance gate. DSS used existing pedestal and added a new video intercom station. We installed a new mount that holds the existing keypad and new video intercom station. Next, we installed one master station at the receptionist desk. ...

February 20, 2025 | Dallas, TX

Customer requested a new card reader for their suite, so we installed a new HID compatible reader. We pulled cabling from the door over to the mechanical room where the spare ports reside. Lastly, we terminated the devices to the panel, add to the system, program and test.

February 13, 2025 | Dallas, TX

Customer requested an access control system. DSS installed a Brivo access control system on the front door. DSS provided a CR/Keypad at the door along with all other door related devices. Customer will be able to control the system by a mobile app.

January 23, 2025 | Dallas, TX

Customer needed to get the cameras from PC4 viewable from the main office. We located the Avigilon server in the 3rd floor server room in PC4 and added new users to the system. I verified that Kelly could access the PC4 cameras from her desk.

January 17, 2025 | Dallas, TX

Customer wanted DSS to add an intercom as well a door station. DSS installed one answering station with audio and video. DSS also installed a wall mount adapter for the main entry intercom. Lastly, we installed the wedge on the front door unit. As always, we tested the unit to ...

January 17, 2025 | Garland, TX

Customer requested a power supply replacement. We successfully replaced the power supply and installed a relay control. Lastly, we verified the door functioned properly (lock/unlock).

January 15, 2025 | Grapevine, TX

Customer requested additional electronic devices for their doors. DSS supplied two panic bar electric latch retractions along with a power supply and door loop. Additionally, we supplied one electric strike and two door alarm sounders.

January 15, 2025 | Grapevine, TX

Customer contacted us to add four 4K IP cameras to the dock doors and two 4MP IP cameras to the IT Room. We pulled the game changer cabling back from the camera locations to the server room. Second, we patched in each cable to the patch panel, POE Switch, and ...

January 15, 2025 | Richardson, TX

Customer contacted us to take over their existing system and replace it with a new Brivo Access Control system. We replaced the existing broken Software House System with a new Brivo Access Control System. DSS also programmed the building access card format in the new system so the building card ...

January 15, 2025 | Forth Worth, TX

Customer requested 100 HID Access Cards, and we successfully programmed and activated cards for customer to pick up.

January 14, 2025 | Dallas, TX

Customer contacted DSS to upgrade their system with a Brivo cloud managed system. We replaced the Truportal control panel with a Brivo system that will be monitored. We programmed, tested and made sure it worked properly before leaving the site.

January 9, 2025 | Dallas, TX

Customer contacted Dallas Security Systems to input a multi-head camera in the parking garage. We pulled outdoor rated cabling from the camera locations near the elevator. We installed the cameras on the wall, loaded the Avigilon Licensing and tested the cameras upon completion.

January 8, 2025 | Dallas, TX

Customer contacted us to install a DMP alarm panel for panic button monitoring. The panic buttons will be programmed, tested, and deployed to appropriate locations. At the end of the job, we informed the customer that once a button has been activated the police will be dispatched and the panel ...