Completed Jobs by Dallas Security Systems

January 7, 2025 | Dallas, TX

Customer contacted us to install seven additional cameras in the parking garage and a network switch in the SE storage room. We added seven cameras and installed a router to route both the customers network and the Garage camera network to the NIC on the NVR.

December 14, 2024 | Frisco, TX

Customer requested that we replace their old laptop computer and monitor with 4k viewing capabilities. We successfully installed DW software and moved over cameras and license to the new computer. We also verified that the cameras, recordings and licenses were there.

December 12, 2024 | Dallas, TX

Client called in needing glass break detectors, so we installed sixteen wireless glass breaks, four wireless sirens and one repeater to system. All system checks are good, communications and devices are communicating with panel.

December 10, 2024 | Frisco, TX

Customer contacted us to install a 180-degree view camera. We successfully ran a Cat6 cable from the first floor to second floor, programmed camera, verified motion recording and tagged camera cable. We contacted DW to do a manual activation for camera license and activated licensing.

November 22, 2024 | Dallas, TX

The client requested a battery change and window sensors for their new windows. We successfully replaced the battery.

November 20, 2024 | Burleson, TX

Customer had us come out to repair a strike that keeps burning out latch assemblies. We successfully resolved the issue by verifying that the strike was receiving the correct amperage at 0.25 mA and the proper DC voltage at 24.7 VDC. We installed a new HES 9600 strike and placed a warranty sticker ...

November 19, 2024 | Dallas, TX

Customer called in because their intercom was not working. We checked the call box at the front door and found the unit was dead then checked the file room and found the rack was dead. Next, we found the 110 plug at the wall and verified the power was good. Finally, ...

October 11, 2024 | Plano, TX

DSS installed a DMP XT50 Intrusion Detection Panel in the IT room and connected it to the network as well as installed door contacts at the two front doors. The existing warehouse alarm devices were tested and connected to the panel with wireless transmitters. Any devices that weren't working were ...

October 7, 2024 | Mckinney, TX

We installed WinDSX software on their PC and changed the Path to Data to the WinDSX share on the WinDSX Comm Server and rebooted the software. We then showed the customer how to log in and test to make sure everything was working to their satisfaction.

October 7, 2024 | Dallas, TX

Customer wanted to move DSX and camera software to new machine. We successfully backed up the DSX, version 3.9.3 files and installed new DSX software onto the new virtual com server. Converted the database and verified the data was good, keyed the software to the new server and backed up the ...

October 6, 2024 | Dallas, TX

We successfully added an NVR to the Star4live account and checked the live feed from the mobile device to ensure everything was online. Additionally, we updated the NVR to the latest firmware.

September 30, 2024 | Colleyville, TX

We installed the access control panel equipment in the equipment room, terminated all of the wiring from the doors, added it to the network, programmed and tested system upon completion.

September 25, 2024 | Fort Worth, TX

Customer requested updates on the CCTV (cameras). We installed an IP Network Video Recorder (NVR) in the IT room and connected the new cameras to it. The four new megapixel IP cameras were installed in place of the existing IP cameras. DSS also programmed the cameras, NVR and trained personnel ...

August 29, 2024 | Forth Worth, TX

We were able to drop off, set up, and program surveillance trailer for 24/7 monitoring of the area of choice by the customer.

August 14, 2024 | Dallas, TX

We delivered, set up and programmed Solar Surveillance Trailer which also came with a mobile app.