Nick Rouse

Grapevine, TX

January 15, 2025

Customer contacted us to add four 4K IP cameras to the dock doors and two 4MP IP cameras to the IT Room. We pulled the game changer cabling back from the camera locations to the server room. Second, we patched in each cable to the patch panel, POE Switch, and added the DW Licensing for the IT Room. Last, we installed the cameras for the dock doors, programmed and tested cameras to make sure everything worked properly. These cameras are designed to get the best view possible with one of Digital Watchdog highest resolution cameras.

Richardson, TX

January 15, 2025

Customer contacted us to take over their existing system and replace it with a new Brivo Access Control system. We replaced the existing broken Software House System with a new Brivo Access Control System. DSS also programmed the building access card format in the new system so the building card will work on the tenant system too.

Dallas, TX

January 9, 2025

Customer contacted Dallas Security Systems to input a multi-head camera in the parking garage. We pulled outdoor rated cabling from the camera locations near the elevator. We installed the cameras on the wall, loaded the Avigilon Licensing and tested the cameras upon completion.

Dallas, TX

January 7, 2025

Client requested a DK26 access control system on the glass door going into the reception to match the system put in for another suite. We went on to install the access panel/keypad, door position switch, exit button, exit motion and Inovonics wireless release button. Upon completion we made sure that the system worked properly.

Richardson, TX

December 19, 2024

Customer contacted DSS to reinstall two motion detectors. We remounted two Bosch 360-degree motion detectors and tested them to make sure they functioned properly.

Burleson, TX

November 20, 2024

Customer had us come out to repair a strike that keeps burning out latch assemblies. We successfully resolved the issue by verifying that the strike was receiving the correct amperage at 0.25 mA and the proper DC voltage at 24.7 VDC. We installed a new HES 9600 strike and placed a warranty sticker on the strike. At the end of the visit, we confirmed with our client that the strike operated appropriately.

Colleyville, TX

September 30, 2024

We installed the access control panel equipment in the equipment room, terminated all of the wiring from the doors, added it to the network, programmed and tested system upon completion.

Haltom City, TX

February 13, 2024

DSS Pulled new cat 6 cabling to two (2) new 6-50mm bullet cameras and mounted on the face of the building. Adjusted for best view possible.  Also installed a new Digital Watchdog Turret Camera in kitchen. Connect the cameras to the DW System, aim, focus and test.

Lewisville, TX

February 8, 2024

The client needed access control and camera systems for a new facility. DSS installed new systems with (5) Brivo readers & (1) ACS6100R-E panel, (4) HES electric door strikes and panic hardware, Honeywell exit devices, (7) Eagle Eye 4MP cameras with CMVR520 for up to 50 cameras. TRENDnet 24 port CAT6 panel, Battery back-up, mobile credentials and Brivo & Eagle Eye Cloud services.

Grapevine, TX

February 5, 2024

Provided and installed a new Boon Edam Turnlock 100 Turnstile (Black Powder Coat) with WinDSX Access Control entering into client's suite.  The card reader will control ingress and unit allows free egress/exit. Card reader mounting boxes: Included for entry & exit (2 total).

Wylie, TX

January 31, 2024

DSS ran wire, conduit and installed (1) Digital Watchdog 4MP IP turret and (1) DW 4K IP dome cameras. Also reconfigured existing interior cameras to the DW server for remote access.

McKinney, TX

January 30, 2024

DSS wired and installed (5) Avigilon 12MP Fisheye dome cameras and network switches on Avigilon enterprise license and connected all to the network.

Denton, TX

January 10, 2024

Interfaced the existing receiver to the DSX Access Control System to monitor the panic buttons and readers. Install the new DSX 1042 & 1048 Controllers to the existing system.  Added and grouped the new locations to the hospitals main location on Win DSX Database with existing card holders.  Programed each device with the door naming scheme provided.  Wired each door into the device, program and test accordingly to meet the hospital's requirements.   Also setup (2) WinDSX workstations at the facility for making badges.  

Addison, TX

December 20, 2023

Pulled CAT6 cabling from new Avigilon 2.0C H5A D1 indoor dome camera location to POE switches. Installed new dome camera in hallway. Added camera license to the Avigilon server. Added new dome camera to ACC7 software, programmed, adjusted view and tested. Took pictures of network rack, camera view, IP location and switch and saved to project.

Wylie, TX

November 15, 2023

We replaced the headend NVR CCTV recording servers with a Digital Watchdog solution and added Digital Watchdog cameras.