Jeromy Bryant

Dallas, TX

July 10, 2024

Dallas Security Systems, Inc. wired in all zones from existing panel, programmed, and tested system. We also replaced the 3 pull-apart contacts on overhead doors with rail mount and the motion detector over the front entry and the keypad. Afterwards, we trained our customer on the DMP keypad and app control. The customer's business is also receiving monitoring.

Irving, TX

June 26, 2024

Dallas Security Systems, Inc. replaced (15) existing analog cameras with IP cameras. Installed new Cat6 cable from cameras to POE switch. Programmed and adjusted view. Installed new pole in parking area above garage down ramp and ran cabling down into security room to switch. We also installed (2) cameras on pole to cover parking lot. Programmed all cameras to record on motion. After job was completed, we trained customer on UniView software and app.

Garland, TX

June 20, 2024

We successfully installed new cabling along red iron back to server room for all cameras. DSS installed NVR, monitor, and switches inside server room and connected all cameras. DSS programmed the NVR, and cameras for motion recording @ 12fps. After the job was completed, we trained the customer on how to use the software and app to view cameras.

McKinney, TX

May 7, 2024

Dallas Security Systems, Inc. removed existing access control panel and installed a new Sicunet panel. We wired in existing devices, programmed, and tested system to make sure all devices function properly. We replaced existing maglock with a new one. Upon completion of the job, we trained customer on the new Sicunet system.

Plano, TX

March 14, 2024

DSS submitted a permit application to the City of Plano to install door release for main door. All devices were installed and tested after permit approval. Brivo cloud controller was installed in IDF room and cabling was ran to the Lobby door. We also installed a card reader, strike, door contact, and REX motion on door. A wireless release button was placed at front desk to unlock lobby door. Upon completion of the job, we trained the customer on the Brivo software and app. 

Allen, TX

January 24, 2024

DSS submitted permit application to City of Allen for installing Dynalock maglock, Honeywell exit motion, and Camden exit button on 2 main doors. All devices installed and tested after permit approval. Fire alarm was also connected directly to DSX panel and tested. An Alarm Controls wireless release/panic button was also installed for remote access.

Westlake, TX

December 21, 2023

Install (2) new Uniview 4MP turret cameras in the classrooms and connect to existing Avigilon server. Focus and program cameras to record video & audio. One classroom already had a camera that we replaced.

Cedar Hill, TX

December 5, 2023

Installed control panels and ran cabling to the shop and office access doors and installed HES-5200C failsafe/secure strike devices. Wired door into control panel. Tested doors after programming.